9.ABC group resetting

Press the MENU key twice, 1,2,3 will display with flash.

Press + or - key to select your desired code from 1 to 3 A =1 B=2 C=3 same as

Intercom FTAN10A.

Press the PTT key to confirm and quit or press MENU key to continue next function

setting.

10.VOX (Hands-fee function)

The unit has a built-in Voice Activated Circuit(VOX) function. You can enjoy talking and

listening without pressing PTT key.

Press the MENU key 3 times. LCD display VOX icon and VOX sensitivity level from OFF

1, 2,3 for OFF low medium and High respectively.

After turning on the VOX function. LCD will display VOX icon. Press PTT to confirm and

quit activate VOX function.

11.SENDING CALL TONE

You can use 1 of 10 different " Call Tones" to get attention of other user on the same

channel.

Press the key and you will heard the tone. LCD will display the transmit icon and your

call tone will be sent.

12.SELECTING CALL TONE

Press the MENU key 4 times , LCD display 1CR icon and call tone number will flash

Press + or - key to selected your desired call tone from 01 to 08 .

Press to continue next function setting.

13.AUTO POWER OFF (APO)

Press MENU key 5 times, LCD display APO icon.

Press + or - key to select auto power off time from 0 to 4 hours .

Press PTT key to confirm and quit or press MENU to return to Main screen.

After turning on the function. LCD will display APO icon and automatically turn off at

designated time.

14.KEY TONE ON/OFF

Press MENU key 6 times, LCD display On to ( Key tone On) or OF to ( = key tone Off)

Press + or - key to toggle key Tune On or Off .

LCD display icon will be on when Key Tone is On. This Icon will be off when Key Tone is

Off.

Press PTT to confirm and quit or press MENU to continue next function setting.

15.ROGER BEEP

The roger beep function enables a short tone signal which is transmitted after releasing

the PTT button.

Press MENU key 7 times display On or icon ( = Roger Beep On) or OF or (=Roger

Beep Off).

Press + or - key to toggle Roger Beep On or Off.

Press PTT to confirm and quit or press MENU to continue next function setting.

3. PRECAUTIONS

Note the following important precautions before using INTERCOM for the first time.

Read this manual before use the unit.

Avoid the direct exposure to solar rays and/or in front of heat.

Do not operate the radio in hazardous environments, explosion or fire may result.

Do not operate the radio in high humidity dusty or explosive environment.

Clean by using a cloth slightly dampened. Do not use alcohol, solvents or abrasives etc.

Do not attempt to modify the radio. The radio is designed to comply with FCC.

The LCD display is made of glass and maybe damaged it dropped or impacted.